Reactor core cutting machine
This machine cut the transformer core lamination in right angle, In the PLC screen, the width, length, cut quantity punching dies, cutting speed etc. can be pre-set.
1 Inverter-controlled decoiler
2 Automatic center positioning & guiding devices
3. Cutting Device
4 Online hole punching device
5 Control system PLC
6.Belt transmitting table
7.Stacking table
Cutting length:10mm-5000mm
Shearing thickness:0.8-4.0mm
The shearing precision:+-0.2mm
The shearing angle:Max0.025 degrees
Cutting burr height:Max0.02mm
Punching burr height:Max0.03mm
shear speed:5-50 pieces per minute
Characteristics
1.Tailoring:using hydraulic power technology,namely the shear stress,fast speed,low noise,long life.
2.Leveling:the use of high torque AC synchronous servo motor driven 11 roller leveling device,
leveling and shearing integration.
3.Feeding:the use of high torque AC synchronous servo motor,has the advantage of fast response,high
positioning accuracy,low noise,small thermal braking,long life.
4.Motion control:the advanced PLC controller,touch screen operation,simple and convenient.
5.Life assurance:This equipment standard(linear guide,ball screw,all kinds of bearings)are imported high-quality parts,basic parts processing and assembly of high precision,the maximum extension of the service life of the equipment.
Cangzhou Kenuo international co.,ltd. Whatsapp:0086-18931789005
